#0478 APRS usando LoRa en español, configuración del Tracker, Igate, Digipeater, long range, XQ2CG

---------------------------- You can watch the second part of this video here:    • LoRa - APRS. Ricardo, CD2RXU muestra como ...   --------------------------- Step 1: Download and install "Visual Studio Code". https://code.visualstudio.com/download Search PlatformIO IDE extension -- Install PlatformIO IDE ------------------------ Step 2: Download the Igate and Tracker packages from Github. https://github.com/search?q=lora+aprs ------------------------- Step 3: Configure the Tracker in VS Code and upload your board via USB Identify the board -- "TTGO LoRa32-OLED V1" -- Import (packages) -- Upload Data configuration -- "tracker.json" -- callsign Connect the board to the PC via USB Build (compile) -- Upload -- Upload Filesystem Image ------------------------ Step 4: Configure the iGate in VS Code and upload your board via USB Identify the board type -- "TTGO LoRa32-OLED v2.1.6" -- Import (packages) -- Upload Data configuration -- "is-cfg.json" -- callsign, Wi-Fi SSID and Wi-Fi PASS, Lat and Lon, APRS passcode Connect the board to the PC via USB Build (compile) -- Upload -- Upload Filesystem Image ---------------------------- LoRa® modulation is a spread spectrum technique that uses wideband linear frequency-modulated pulses to encode information, the frequency of which increases or decreases over a given period of time. LoRa® utilizes the full bandwidth of the channel to transmit a signal, making it resilient to channel noise and long-term relative frequency error, multipath fading, and Doppler effects. --------------------------------- Igate: http://www.lilygo.cn/claprod_view.asp... Tracker: http://www.lilygo.cn/claprod_view.asp... --------------------------------- Next video: WEB CONFIGURATION ------------------------------ Comments are disabled because I can't answer them all properly. To comment on this video, please do so on Telegram by joining our group at the following link: https://t.me/xq2cg