How To Replace Lower Ball Joint 1998-2011 Ford Ranger

Shop TRQ on 1AAuto.com Ball Joint https://trq.video/ib-1ASBJ00024 Modern suspensions combine a number of moving parts for safe and stable handling. The ball joint is the crucial moving component that ties those parts together. The ball-in-socket joint can wear out and loosen over time. Or, the rubber protective boot can tear, allowing contaminants to seize the joint. Bad ball joints are a common failure point on vehicle inspections because they lead to unsafe driving conditions. Fortunately, they are relatively easy to replace with the right know-how. This video shows you how to install new, quality TRQ ball joints on your 1998-2011 Ford Ranger. • Check here for more videos on the 1998-2011 Ford Ranger:    • Ford Ranger 1998-2011 3rd Generation   This repair was done on a 2006 Ford Ranger XLT 4.0L Extended Cab Pickup 4-Door 4WD Automatic and the process should be similar on the following vehicles: 1998 Ford Ranger 1999 Ford Ranger 2000 Ford Ranger 2001 Ford Ranger 2002 Ford Ranger 2003 Ford Ranger 2004 Ford Ranger 2005 Ford Ranger 2006 Ford Ranger 2007 Ford Ranger 2008 Ford Ranger 2009 Ford Ranger 2010 Ford Ranger 2011 Ford Ranger Tools you will need: • Pry Bar https://trq.video/ohi-1AXAA00020 • Ball Joint Press • Brake Caliper Hanger https://trq.video/obe-1AXAA00439 • Trim Tool Set https://trq.video/oiS-1AXXX00006 • Channel-Lock Pliers • Snap Ring Pliers • Straight Cutters • 3/8 Inch Impact Gun • Ratchet • Socket Driver • Torque Wrench https://trq.video/oqY-1AXAA00044 • Rust Penetrant • Center Punch • Floor Jack • Hammer • Jack Stands • Wheel Chocks Subscribe:    / @trq   Check out our playlist: Ford Ranger 1998-2011 3rd Generation:    • Ford Ranger 1998-2011 3rd Generation   📱 Download the TRQ Auto Repair App for more videos, torque specifications, and car repair information: https://trq.video/appdownloadyt ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. Note: As an Amazon Associate we earn from qualifying purchases.