Step 3: How to Install an EVA Foregrip (Clean & Professional Results)

In this video, I demonstrate how to properly install an EVA foam foregrip onto a downward locking reel seat while achieving a clean, professional-looking finish. One of the most important tips I share is how to protect the reel seat threads with painter's tape before applying adhesive. This simple step helps prevent epoxy from getting into the threads, making cleanup much easier after installation. You'll also learn how to measure and mark the foregrip location, prepare the rod blank for maximum adhesive bonding, install the grip, clean away excess epoxy, and finish the installation by adding a winding check for a clean transition. In this video you'll learn: • Protecting reel seat threads before installation • Measuring and marking foregrip placement • Preparing the blank for proper adhesion • Applying rod-building adhesive • Installing an EVA foam foregrip • Cleaning excess adhesive • Installing and cleaning a winding check Whether you're building your first custom fishing rod or refining your rod-building skills, these techniques will help you achieve cleaner, more professional results. 🎣 Thanks for watching and tight lines! 🛒 Purchasing through my affiliate links below will help support this channel at no additional cost to you. As an Amazon Associate I earn from qualifying purchases. I appreciate your support! #rodbuilding #customrods #fishingrod #rodwrapper #fishing