Honda GB350S - USB Charger for under £10 - better than Honda's version!

The Honda GB350S is an amazing bike, but if you want to charge your phone the Honda will charge you £45 and leave you with an ugly box on your dashboard. I'll show you how to install a charger for under £10 all in, with a little DIY and some relaxing time in the workshop! NB - Don't buy the ring connectors I've shown in the video - you need Male Bullet Crimps with the RED insulation - look at the images in the video. I soldered my connections and covered them with heat shrink , but the bullet connectors are almost as robust and much easier if you don't have a soldering iron. Just make sure to squeeze them very tightly with decent pliers and check the connection but trying to pull them apart with reasonable force. Don't forget to check the polarity - the RED wire from the bike goes to the RED wire (positive) on the charger. The GREEN wire from the bike goes to the BLACK wire (negative) on the charger. If you can't get the headlight back in place, don't force it - take your time, try some different positions and it will fit eventually. I used the space at the bottom of the headlight bowl where the wiring loom exits. USB Charger - https://amzn.eu/d/fu7r6Ia Bullet Connectors - https://www.ebay.co.uk/itm/1608814962... Nicer charging cable (lightning version) - https://www.aliexpress.com/item/10050... Please consider a like and subscribe if you enjoy the channel - it means a lot!