Audi A6 C6 Замена рычагов и снятие амортизатора передней подвески

To remove the front struts on #Audi #A6C6 you will need the following tool Keys and end heads for 10, 16, 18, 21 Ratchet with extension Puller for ball Hammer Usually, the most difficult thing is to Unscrew the bolt from the knuckle of the upper mounting of the ball arms, but I usually lubricate it once a year, so in my case it unscrewed without any problems at all Procedure for repairing the front suspension Audi A6 C6: 1) Unscrew the nut 10 from the body position sensor on the lower left support arm 2) Unscrew the lower mount stabilizer bar key to 16 3) Unscrew the lower bolt shock absorber keys on 18 4) Unscrew the top bolt in the rotary knuckle with 16 keys, may need heating or have to drill 5) remove the ball upper arms from the knuckle 6) under the hood, remove the 3 plugs, Unscrew the 3 bolts of the upper support bracket with the end head 16 7) remove the strut with shock absorber 8) keys on 16 to Unscrew bolts of fastening of the top levers 9) to disassemble the rack will need to clamp the spring and Unscrew the shock absorber rod with a wrench on 18 and a hexagon on 5 (sorry, in the video I did not shoot this) 10) fasten the upper levers, the main thing to observe the distance from the upper bracket 11) screw the rack back on 12) Remove the lower lever, unscrewing the nut with a ball wrench on 21 and fastening the silent block with keys on 18 13) new lever to tighten only on loaded suspension ============================== Parts numbers RTS 9505988 the lower Arm a direct bearing 3275 RUB (original VAG 4F0407151A) RTS 95059812 Lever upper left front 1381 RUB (original VAG 4E0407505E) FENOX CA12121 Lever upper left rear 1570 RUB (original VAG 4E0407509G) VAG 4F0412391C Support bracket 1800 RUB Used KYB 341822 shock absorber oil and gas front (original VAG 4F0413031) ============================== Links to manuals on removal and installation of levers and shock absorbers #Audi #A6C6 The front suspension arms https://yadi.sk/i/iQczETL-j7YeYg The front Desk https://yadi.sk/i/KXr2Fm3aEKesFQ Removal and installation of shock strut (coil spring) with support bracket https://yadi.sk/i/CzBUs-aP4rmR8Q My blog on DRIVE2 https://www.drive2.com/users/mark47/