Barnstorm's Indian Challenger Mid Control Kit Install Video

Check out all our Challenger products at: https://shopbarnstorm.com/collections... This is an in-depth install instruction video for our Indian Challenger Mid Control Kit, which is available for 2020+ Indian Challengers. Call or email us at : 508 413 2500 [email protected] Built for the performance minded rider, Barnstorm's Mid Control kit changes the rider ergonomics significantly as compared to stock. This change allows the rider to sit in a more aggressive and flexible riding position, opening up the full potential of the Challenger platform. The kit also completely changes the visual dynamic of the machine, complementing and building upon the performance-inspired heritage of the Challenger platform. The components of this kit replace the factory brake side stator cover and primary side cold start cover. Installation of all supplied parts is 100% bolt-on and will work with your stock exhaust.* We consider our Mid kit to be a DIY friendly modification that is 90% bolt on. However, it does require a few basic skills and basic tools. You'll need to be able to follow specific installation steps, as well as be able to properly disassemble and reassemble critical components. Installation also requires carefully re-positioning a portion of the rear brake line, and bleeding your brakes afterward. This procedure moves the location of the stock banjo fitting so that it lines up with the supplied Brake Line adaptor fitting once it is installed. Allow 3-5 hours of installation time for the average DIY'er. If you don't feel confident that you will be able to correctly install this kit, please contact us!! We would be happy to try and help set you up with a shop local to you that can perform the installation! Barnstorm Cycles www.Facebook.com/BarnstormCycles www.Instagram.com/BarnstormCycles www.BarnstormCycles.com