HOW TO FIX: "Printhead Replacement Incomplete. Restart It." HP Designjet Txxx and Zxxx Series

If you own a T or Z series Designjet printer, you've almost certainly seen this message: Printhead replacement incomplete. Restart it. And you can't print anything, because the printer isn't happy. This kit will save you hundreds of dollars on replacement printheads and ink cartridges. Here is the fix: https://www.lpscomputer.com/products/... Ink starvation of the printhead caused by poor seal at printhead port This is the main reason you see the "printhead replacement incomplete" message. Here's what happens: The printhead is starved for ink, fails to put ink through the drop detector --results in failure to complete print system setup, and the printer returns the "printhead replacement incomplete" message. You've probably endured the long, annoying process of getting the printer to accept printheads. Printheads which may be perfectly good, but due to worn seals on the ink tube system, the printer cannot accept the printheads. The seals in this kit solve that problem, permanently. Compatible printers: HP Designjet T610 HP Designjet T1100 HP Designjet T770 HP Designjet T1200 HP Designjet T1120 HP Designjet T620 HP Designjet T790 HP Designjet T795 HP Designjet T1300 HP Designjet T2300 HP Designjet Z2100 HP Designjet Z5200 HP Designjet Z3100 HP Designjet Z3200 HP Designjet Z5400 HP Designjet Z2600 HP Designjet Z5600 HP Designjet Z6 HP Designjet Z9