Solo Cabin Build: Why You Should Never Skimp on These Basics (Cabin Cuts #29)

Building a cabin foundation is about more than just wood and nails—it's about making sure it lasts. In this "Cabin Cut," I'm sharing a few critical steps I take to protect the structure while working alone. I talk about why I pre-spray the timber with preservative, including the ends (something you can't do once it's in place!). I also share my experience with my 24L air compressor—tip: get a 35L or larger if you're using a nail gun for 90mm nails! Finally, a big tip on hardware: Don't skimp on your bolts and washers (shaibi). Always use zinc-plated to prevent rust and rot under the house. In this video: The right way to apply wood preservative before installation. Why your compressor size matters for 90mm framing nails. Using an Impact Driver with a socket adapter for heavy bolts. Why zinc-plated hardware is non-negotiable for a long-lasting foundation. #CabinBuilding #DIYConstruction #SoloBuild #WoodworkingTips #OffGridLiving #AHomeInMotherRussia