Réaliser une analyse combustion sur une chaudière gaz murale

How to perform a combustion analysis on a wall-mounted gas boiler. The boiler is a Vaillant ECOTEC PLUS. The flue is a balanced flue. Step-by-step tutorial. Learn how to perform a combustion analysis. Determine the combustion characteristic point and plot it on the Billard or Ostwald diagram. Determine whether combustion is good or not. Determine excess air - Heating engineer. Carbon monoxide. CO. Ppm In the video, the measuring device is a TESTO 310. ________________ Tools for performing the analysis ___________________ Ostwald or Biard diagram Testo 310 or a combustion analyzer ________________ Chapters in this video _____________________________ Here is the step-by-step tutorial. 0:04 Turn on the analyzer following the procedure 0:59 Determine the fuel type 1:24 Start the boiler and operate it (wait 3 to 5 minutes) 1:45 Remove the inspection plug (flue gases) 1:58 Insert the probe 2:05 Press start measurement and wait for the measurements to stabilize 3:05 Ostwald diagram: 3:23 Combustion types: 3:45 Locate the combustion characteristic point and determine the combustion type 4:12 Determine the excess air 5:33 Replace the plug ________________ Information ______________________________________ For a wall-mounted atmospheric boiler, whether vented or not, the excess air setting is determined by the manufacturer; it is often between 30 and 35%.