EP10 Project Lotus Hunter. Let the 2ZZ-GE Swap into the Toyota MR2 Spyder (MR-S) zzw30 begin! Part 1

Things just got serious! Let me show you 30 minutes of Pure 2ZZ-GE Swap documentation in the form of a step by step tutorial that you can follow along! I hope you enjoy this video, lots of effort has gone into it! Add me on Insta: @jesse_yaroo My Instagram:   / jesse_yaroo   Finally! I began the Swap Process of my prepped 2ZZ-GE engine into my Toyota Mr2 Spyder (Swiss Spec, zzw30 or Japan Toyota MR-S). It was smooth sailing until...of course something was about to happen! (a bit of damage and me losing my cool...). By Watching this video, you will have a full step by step Process on how to do an engine swap of a 2ZZ engine into a Toyota Mr2 Spyder. This is part one with lots of details and over 30minutes of footage! I also finally got my hands on some new Camera Gear. A Canon M50, Lenses and a Good Microphone! Enjoy!!! Step by Step Process: 2:03 Replace Spark Plugs with new ones 2:10 Reinstall 2ZZ Coil Packs 2:42 Reinstall 2ZZ Injectors (or Bigger ones) 3:11 Install 2ZZ Swap Oil Dip Stick 4:45 Install Block off Caps (3X), in my case only 1 was needed 7:15 Install Stock 2ZZ Engine mount (only half of it) 9:45 Install 2ZZ Swap Engine Mount Bracket to the stock 2ZZ Half bracket 12:06 Install 2ZZ Alternator (resists better to high RPM) 14:17 Install 1ZZ Idler Pulley for Accessory Belt 15:03 Install 1ZZ Air Conditioning Pump (100% Plug and play) 17:49 Re use and install 1ZZ Baffled Oil pan, probably best modification you can do to your engine to make it more reliable than it already is (100% Plug and play) 20:51 Install Full 1ZZ Mr2 Spyder, mr-s (zzw30) Engine loom 21:03 Install Lift Harness in conjunction with your Mr2 zzw30 Engine loom 22:37 Install O2 Sensors 22:53 Don’t Forget Grounding Cables (negative, minus connections to the chassis) Super important! 23:01 Install Intake, AFM (Air Flow meter) and its adaptor. I used the 2ZZ one Thats it for Part one! Thanks for watching! My recommandation: Watch the the whole playlist of this project to fully grasp what and why I am doing it! My Mr2 Project:    • Project Car: Toyota Mr2 zzw30 "Lotus Hunter"   How to Swap a 2ZZ Tutorial Playlist:    • How to Swap a 2ZZ - GE Engine into a Mr2 S...   Make sure to subscribe if you want to see the next steps of the Mr2 Build! #toyota #mr2 #zzw30 #1zz #2zz #2zzge #engineswap #swap