[18] Merlin MR800 / MR600 - How to Set Travel Limits

Merlin Garage Door Adjustment Setting the Limits Up limits regulate the points at which the door will stop when moving up or down. Follow the steps below to set the limits. • Check that the opener is engaged and midway between open and closed. For left hand side installations the black wire jumper loop on the terminal block should be removed. To program the travel limits: • Press and hold the BLACK button until the orange indicator light starts flashing slowly and then release. Opener lights will dim. Press the BLACK button to move the door UP or the PURPLE down button to move the door DOWN until the door reaches the desired UP limit. Check to be sure the door is high enough for your vehicle. Adjust if necessary. • Press the GREEN start button This sets the full UP limit. The door will travel to the floor and reverse back to the UP limit. The opener has learned its limits. • The indicator light will stop flashing when the limits have been learned. NOTE: If the door presses excessively on the floor or reverses before it reaches the floor use the Manual Limit setting option: Manual Limit setting With the door in the midway position. • Press and hold the black button until the orange LED starts flashing. • Use the black (up) and purple (down) button to set the door opening limit • Press the Green activation button to start the door, once it starts travelling down, press either the black or purple button to engage manual limit setting. • Use the purple and black buttons to set the closing limit. • Test door three or four times to check limit settings. That Roller Door Bloke - Your Repair & Automation Specialist . . . . . . . . Roller Door Repairs Adelaide, Garage Door Repair Near Me, Emergency Garage Door Repair Near Me, Garage Motor Repairs Near Me, Same Day Garage Door Repairs, Residential Garage Door Service, Garage Door Companies, Garage Door Opener Installation, Garage Door Service, Garage Door Spring Replacement, Garage Door Maintenance, Quick Garage Door Service,