How to Replace TA-9 Spindle Washers and T-16 Packing Washers | Symmons Industries

Learn how to replace the TA-9 Spindle Washers on the TA-10 Control Spindle, and the T-16 Packing Washers inside the T-12A Cap Assembly. Tools and Supplies Needed: New, genuine TA-9 washer kit: https://www.symmons.com/products/wash... New, genuine T-16 washer kit: https://www.symmons.com/products/wash... 15/16 open-end wrench or large adjustable wrench small adjustable wrench Plumber's slip-joint pliers Allen wrench set Phillips-head screwdriver flathead screwdriver (if you have integral stops) Directions: 0:00 Intro 0:55 Tools and supplies needed 1:22 Turn off water supply to valve 1:37 Turn the valve to the completely open position 1:56 Remove cap assembly and spindle 3:57 Replace T-16 cap washers 5:07 Replace TA-9 hot and cold washers 6:21 Reassemble cap assembly and spindle back into valve 7:06 Put handle on temporarily and close the valve 7:23 Turn the water back on and check for leaks