Hướng dẫn cài đặt và khôi phục mặc định đồng hồ nhiệt OMRON E5CC-RX2ASM-800

Instructions for installing and restoring default settings of OMRON E5CC-RX2ASM-800 temperature controller Specifications E5CC-RX2ASM-800 48 x 48mm temperature controller, all types of probe and analog signal input, relay output. Power supply: 100 to 240 VAC, 50/60 Hz Input:Thermocouple: K, J, T, E, L, U, N, R, S, B, W, or PL II Platinum resistance thermometer: Pt100 or JPt100 Infrared temperature sensor: 10 to 70°C, 60 to 120°C, 115 to 165°C, or 140 to 260°C Current input: 4 to 20 mA or 0 to 20 mA Voltage input: 1 to 5 V, 0 to 5 V, or 0 to 10 V Control method: ON/OFF or 2-PID (auto-tuning) Control output 1: SPST-NO, 250 VAC, 3 A Control output 2: None Alarm output: 2 NO contacts 3A 250VAC 8 set points (SP0-SP7) can be set and saved, selectable from event input, keypad or communication. Other functions: Manual output, heating/cooling control, loop burnout alarm, SP ramp, other alarm functions, 40% AT, 100% AT, MV limiter, input digital filter, self tuning, PV input shift, run/stop, protection functions, extraction of square root, MV change rate limit, temperature status display, moving average of input value, and display brightness setting Working environment: Temperature -10 ~ 55°C; Humidity 25% ~ 85% Standard: UL 61010-1, CSA C22.2 No. 611010-1 (evaluated by UL); EN 61010-1 (IEC 61010-1): Pollution level 2, overcurrent category II #temperature #IndustrialAutomation#OMRON E5CC Key Protect Level, E5CC Operation/Adjustment Protect, E5CC Initial Setting/Communications Protec, E5CC Setting Change Protect, E5CC PF Key Protect