SCX10 Rubicon Pt7: Chassis Mounted Servo & Panhard Bar.

February 2014 UPDATE: In this video I had the drag link going from the servo horn down to the truck's left (as per Axial instructions) and was getting terrible 'bump steer'. Thanks to a suggestion by wynney1978, I moved the drag link to connect down on the truck's right (had to make up a longer drag link approx. 80mm 'ball centre to centre'), so it was going parallel with the panhard bar and the bump steer is solved. Here is an update video on this fix:    • Axial SCX10 - Tuning Pt3: CMS Bump Steer F...   Peeta interrogates Strider about the mutated minions, while we show you how to chassis mount the Axial AX90027: SCX-10 2012 Jeep Wrangler Unlimited Rubicon Builders Kit's servo to keep it safe - Using a Level3-RC mount that includes a 'Panhard Bar' to reduce lateral axle movement and servo suspension twist. Watch out for the next part of the build series where we cover those pesky leaking Axial shocks... Shopping list of parts in this video: ----- Level3-RC's SCX-09 "Axial SCX10 chassis mounted servo kit with panhard bar" (http://level3rc-store.com/axial-scx10.... Note: This was then anodized black. For steering link tweaks: ---- 2 spacers from Axial AXA1414 2x6mm Spacer Grey (6pcs) for the drag bar. ---- 1 spacer from Axial AXA1416 4x6mm Spacer Grey (6pcs) for the post between the drag bar and the main steering link between the two front wheels. ---- 1 screw from Axial AXA121 M3x30mm Hex Socket Button Head (Black) (10pcs). ---- (hopefully from your kit) Axial AX80005: Linkage Set (4 x part #1 from the plastic sprue). Information about the 'Panhard Rod' (Bar): http://en.wikipedia.org/wiki/Panhard_rod Legal Stuff: Please note that I do not sell this product and am not affiliated with any of the vendors or manufacturers in this video. I am not liable for any damage or loss through the use of products or techniques shown - Use at your own risk!