만원으로 하이파이 케이블 만드는 방법

I made an RCA cable that delivers a sweet vocal sound. It might be a good idea to make it inexpensively... 1. Cable http://itempage3.auction.co.kr/Detail... 2. Silicone Tube http://s.godo.kr/1i70f My criteria for choosing a cable were: First, it had to be silver-plated, not single-core, and I chose a silver-plated shield. The reason I chose the silver-plated shield is because it's internally twisted. According to Faraday's law, the core conductors alternate vertically, horizontally, and vertically, which helps cancel out external noise. It also provides shielding within the core. As you know, silver has a higher electrical conductivity than copper, and over 90% of the current flows along the conductor's surface. Since it's a signal wire, high-frequency signals flow along the surface of the conductor, while low-frequency signals flow closer to direct current, flowing inside the conductor. Therefore, I believe using silver wire will lower the impedance in the high-frequency range, resulting in a clearer sound. The dielectric surrounding the inner core is made of Teflon. Teflon is a material with a very low dielectric constant among insulating conductors, allowing signals to be transmitted along the inner core without external noise interference. This allows for a very smooth signal transmission. For this reason, I thought it would meet the criteria for a reasonably priced and high-quality interconnect. When you strip the inner shield and core, the silver feels very nice.