Purger ses freins arrière moto à la seringue

Hi!!!! Same as before!! :) This time, you'll use a syringe to bleed your brakes. Here are the steps: 1- Remove the dirty brake fluid from the master cylinder 2- Attach a hose to the bleed screw with the clamp 3- Fill 30cc of brake fluid into the syringe (same fluid as before) 4- Attach the syringe to the hose 5- Bleed the hose 6- Push the syringe plunger then open the bleed screw 7- Wait for the fluid to rise with the bubbles in the master cylinder 8- Continue pushing the plunger while closing the bleed screw 9- Check the brake lever 10- Repeat the operation if necessary 11- If necessary, perform a normal manual bleed to check for trapped bubbles upstream of the bleed screw 12- Clean the excess brake fluid with water and a dry cloth. The advantage is that you really save time priming/changing/bleeding your brake system. This braking system doesn't have ABS, and it's not like a car's! It's based on a basic motorcycle system without ABS or brake booster. CAUTION: Take a slow road test at low speed before hitting the road and check the fluid level and make sure there are no brake fluid leaks. I hope you enjoyed it! See you soon!