Cara Stel Klep In Ex Dan Top TMA(Titik Mati Atas) Suzuki Smash,Shogun 125.How To Set Thevalve smash.

How to set the inlet and exhaust valves along with the top TMA (Top Dead Center) on a Suzuki Smash, Sogun125 motorbike. The steps we must take are: 1. Open the cover on the side of the magnet block and use a 17 T key to turn the magnet section. 2. Open the 17 bolts above the magnet block to see the T mark or letter. 3. Position it on the large gear section of the timing chain where the point must be straight facing forward according to the groove at the end of the cylinder head. 4. Set the inlet and exhaust valves with a size of 0.07 using a fuller gouge for the standard, and it must be tight, then we set the gap to 0.05 or 0.07 for both the inlet and the ex. Thank you to all #SUBSCRIBERS# and viewers wherever you are, hopefully the knowledge is useful. please #SUBSCRIBE AND LIKE# #SIDIK NURYADEN CHANNEL# If you have any questions, please write them in the comments column. Phone/WA: 085863491419. Thank you very much.