How to change front brake discs and front brake pads set on SUZUKI SWIFT 3 [TUTORIAL AUTODOC]

How to change front brake discs / front brake rotors and front brake pads / front brake pad set on SUZUKI SWIFT 3 (MZ, EZ) Hatchback 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 [TUTORIAL AUTODOC] Top brands that produce brake discs and brake pads: STARK, RIDEX, BREMBO, BOSCH, ATE, TRW. 📲 Buying via app is always cheaper than on the website! ❱❱ Install the AutoDoc App — https://interstitials.onelink.me/1036... On our website you will find a wide range of auto parts you are interested in: https://goo.gl/Mj3hVf Brake discs: https://goo.gl/PYpE2E Brake discs for SUZUKI: https://goo.gl/Sy4VbJ Brake discs for SUZUKI SWIFT 3: https://goo.gl/HkuZi6 Brake pads: https://goo.gl/zdrVeB Brake pads for SUZUKI: https://goo.gl/KAmXaq Brake pads for SUZUKI SWIFT 3: https://goo.gl/Hk6jtf SUZUKI Car parts: https://goo.gl/uixMvJ 🔔 Subscribe to AUTODOC's channel and don't miss new videos on car parts replacement ➜ https://www.youtube.com/c/AutodocUk?s... PDF How to replace front brake discs and front brake pads set on SUZUKI SWIFT 3 Hatchback [TUTORIAL AUTODOC] — https://cdn.autodoc.de/uploads/man_pd... 00:12 — Raise the front of the car and secure on supports 00:14 — Loosen the wheel mounting bolts 00:24 — Remove the front wheels 00:30 — Use a drive socket No.13. Use a combination spanner No.15. Unscrew the brake caliper fastening 01:01 — Remove the brake caliper. Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system 01:10 — Remove the brake pads 01:20 — Use a drive socket No.17. Unscrew the caliper bracket fastening 01:44 — Remove the caliper bracket 01:59 — Use a Torx bit T30. Unscrew the brake disc mounting bolts and remove it. 02:23 — Clean the hub and apply high temperature grease to the seating surface of the disc 02:40 — Install the new brake disc on the hub and tighten the screws. Use a Torx bit T30 03:03 — Clean the brake caliper bracket from dirt and dust 04:22 — Install the brake caliper bracket 04:41 — Tighten the brake caliper bracket. Use a drive socket No.17 05:02 — Install new brake pads 05:27 — With the help of a special tool push in the brake caliper piston to a stop 05:43 — Install the brake caliper and fix it. Use a drive socket No.13. Use a combination spanner No.15 Was this video helpful? Give it a thumbs-up and share it with your friends! Have a look at other videos on our channel: ► SUZUKI SWIFT 3 car repair tutorial —    • SUZUKI SWIFT 3 car repair tutorial | Step-...   ► How to replace front anti roll bar link on SUZUKI SWIFT 3 Hatchback —    • How to change front anti roll bar link on ...   Mobile Shop: https://m.autodoc.co.uk 📢 AutoDoc in social media: Facebook:   / autodoc.co.uk   Twitter:   / autodoc_berlin   YouTube:    / autodocuk   Instagram:   / autodoc_autoparts   #autodoc #autodoctutorial Disclaimer: This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements, that are a result of incorrect use or misinterpretation of the provided information. This video is for informational purposes only and does not guarantee achievement of a specific result. The user is personally liable for incorrect use of repair equipment, tools or car parts, in particular, when this use poses the risk of injury. AUTODOC strongly recommends being careful and adhering to the safety rules when doing any repair or replacement. Keep in mind that using low quality auto parts does not guarantee the proper level of road safety. ⚡ AUTODOC CLUB — https://club.autodoc.co.uk Add your car to the AUTODOC CLUB garage and get personal recommendations on repair intervals — https://club.autodoc.co.uk/?to=/user/... ❱❱ Install the AUTODOC CLUB App — https://club.onelink.me/d2X8?pid=yout...