我的openpnp贴片机贴片展示
大家好我是Alan，我的贴片机现在已经发展的很成熟了，并且对比之前做了很多改进和优化，速度上已经达到2000点、小时（视觉全开正常工作的速度，不是最大速度）。精度上我们在前几期直播中已经成功的挑战了0201封装的贴装。现在给我的机器正式命名为TornadoSMT，龙卷风的意思。 今天我们完整的贴2块板子，一共456个贴片元件，给大家展示一个完整的全过程。 因为是直播录像，所以时间比较长，请大家耐心收看，同时别忘了点赞+订阅啊，谢谢大家！
▶︎
I Built an Open-Source Pick-and-Place Machine!
▶︎
「御弟」習遠平、顶流女星景甜，和從未曝光的權力帝國！【文昭思緒飛揚545】
▶︎
DIY Pick and Place Machine in Vietnam
▶︎
I turned an old van into a 2-STORY tiny house
▶︎
用最好的动画为你讲解--机械硬盘的原理
▶︎
TORNADOSMT V2简短贴片展示
▶︎
手动SMT贴片机成品版
▶︎
After assembly - Advanced Calibration Camera Bottom | AFARCO iRON PnP | OpenPnP
▶︎
3D打印件一掰就断？我们都是应力集中的受害者！3D打印工程耗材应力集中测试 | 碳纤尼龙强度测试 | 退火 | inslogic
▶︎
Pick and place machine TM220A, TM240A - Production line
▶︎
Home made pick and place, still in the making ;)
▶︎
Pandaplacer-A1 IN ACTION with various packages | Desktop pick and place machine driven by OpenPnP
▶︎
The Pressure was On for this Urgent CAT 637 Cylinder Rebuild
▶︎
I Built an Internal Cycloidal Robotic Actuator
▶︎
NeoDen N8 Mounting Controller Boards At A Grain Sorting Machine Factory At Coimbatore
▶︎
Inside China's Mini PC Production: How Tiny Computers Are Made
▶︎
Самодельный smd-установщик под управлением OpenPNP 2.0
▶︎
How I Made A C64 Laptop From Scratch - The Portable 64 (Emulation)
▶︎
Pick and place Openpnp tray feeders
▶︎