EcoRobotix ARA Spotsprayer instructievideo: Spotsprayer instellen in het veld

When we arrive on the field with the Spot Sprayer, a number of settings are important before you start spraying. Gerben explains these settings and adjustments of the machine. Step 1: Adjust the running wheels of the Spotsprayer to the correct track width and adjust the height of the Spotsprayer properly. To do this, measure a height of 85 cm from the transition from black to white paint to the tops of the crop. Make sure that the cloths do not drag through the crop and that the machine is properly adjusted horizontally. Step 2: Create the mission for the desired crop. -First a new mission is started. -Choose the desired algorithm, in this case the beets. -Select whether the weeds, everything except the crop or just the crop should be sprayed. -Select the desired safety margin, if you work with contact equipment this can be left off if desired. -Select the desired application rate per hectare, linked to the working speed. -Choose the working width with which you will carry out the treatment. -Check the summary mission and choose a plot owner and a plot name. -Start the mission -Select the "Auto bar" option to enable the automatic boom height adjustment. A control spraying can be carried out with the set values ​​with clean water to check these settings and the spraying result. If the result is satisfactory, we switch to the "Medium tank" IMPORTANT! Before you start, you must first ''Prime'' the system before you start driving. During spraying you can also see the detection images from the cameras. Click on the cross of the screwdrivers and the open-end wrench at the top left. You choose the ''Images'' option and a new tab will open showing the images from the cameras. The first selected option is the image in the RGB spectrum and displays the standard photos. By selecting the ''Detection'' option, the computer displays the images including the ''spray mask''. The crops that are not sprayed are shown in green and the weeds or potato storage (depending on the settings) that the ecoRobotix ARA Spot Sprayer will spray are shown in red. Can't figure it out? Then visit www.Doorgrond.nl