FINALLY! Ultimate Guide to Troubleshooting any Sony LED TV with a blink code. KD-60X690E 6 Blinks.

Step by Step detailed troubleshooting procedure to start eliminating boards on any Sony TV that has a Blink Code Error. We have a Sony LED TV model Kd-60x690e with no picture and the standby light at the bottom turns from green to a red blinking light that blinks 6 times and cycles through a 6 times blink error code with a 3-5 second pause in between cycles. This is a detailed troubleshooting procedure that works on any Sony LCD television. The key here is that Sony televisions do a self-check at plug in, so when the TV then is attempted to be powered on; the standby light actually turns green and tries to power up for about 15 seconds until the TV realizes there is a problem and then shuts down giving a blinking error code on the front of the television. During the Green light stage you have an opportunity to check critical common voltages like LED+ and LED- voltage's, Back Light ON, 12 Volt rails, BL ERR, etc. If a voltage is missing, fluctuating, or way off; then you can pretty much pin point which board the error is coming from. It doesn't matter if you have 6 blinks, 4 blinks, 2 blinks, etc. You still have approximately the same amount of time to make checks before the standby light starts flashing red again. PART 2 to this Video:    • COULDN'T BELIEVE WHAT I FOUND WRONG! Sony ...   ONLINE STORE: