Bongkar silinder head agya tanpa buka cover timing

Disassemble the cylinder head without opening the timing cover to make it easier to remove the cylinder head from the cylinder block. The way to do it is as follows: 1. Cylinder1 is in a state of top compression. 2. Put a mark on the timing chain and timing gear 3. Put a mark on the cam shaft and cup no1 cam shafts. 4. Loosen the camshaft valve gear bolt IN 5. Loosen the timing chain by pressing tertiary inward and hold the timing damper. 6. remove the gear cam shaft IN valve and tie the chain timing with T cable. 7. Unscrew the 10mm damper fastening bolt on the cam EX valve shaft. 8. Unscrew the two 14mm bolts on the top of the fastener cover timing with cylinder head. 9. Unscrew all cylinder head bolts and remove hose and cable attached to the intake The cylinder head is ready to be lifted.