How to Install SuperATV's MaxDrive Powered Flip Windshield for the Polaris Ranger XP1000

Braden is going to show you how to get the ultimate windshield control installed and in your hand. With SuperATV's MaxDrive Power Flip Windshield installed on your Polaris Ranger 1000, you can ride year-round regardless of what Mother Nature has in store. In seconds you can open, close, or set it to any position in between with the flip of a switch and without having to leave your seat. It's a great way to ride whenever you want and be prepared for whatever the day has in store. 00:26 – Tool list 00:31 – Confirm fitment and remove the protective screen from the windshield 00:49 – Install the bulb seal 01:58 – Install lower bracket to the lower portion of the windshield 02:49 – Install upper bracket to the upper portion of the windshield 03:24 – Fully tighten the bracket hardware 03:40 – Install female hinges to the windshield 04:21 – Install actuator brackets 05:06 – Install the opposite side actuator bracket 05:33 – Fully tighten actuator brackets 06:22 – Remove the roof hardware from the machine 06:38 – Apply gasket to the top lip of the machines cage 07:07 – Mount the windshield to the machine 07:23 – Install the male portion of the hinge to the female portion and secure to the machine 09:32 – Fully tighten the hinge hardware 09:49 – Install driver side actuator brackets to clamp 10:49 – Secure driver side clamps to the cage 11:40 – Install driver side actuator 12:57 – Adjust driver side bracket and actuator to fit the machine 13:55 – Repeat same steps for the opposite side 15:16 – Tighten all the hardware 16:33 – Remove cup holder center and feed the actuator electrical harness 18:16 – Rewire the actuator electrical harness to the machine 22:53 – Install the rocker switch 23:35 – Test the rocker switch 23:44 – Manage any loos cords 25:25 – Reinstall cup holder 25:41 – Test out the windshield Ready to pick up your MaxDrive Powered Flip Windshield? Visit superatv.com today! https://www.superatv.com/polaris-rang...