Ford Fiesta 1.6 Petrol (2007) - Thermostat and Housing Replacement

A video detailing the steps involved in performing a thermostat and housing replacement on a Ford Fiesta 1.6 Petrol (2007). This video can also be used to understand how to remove the alternator or replace the coolant expansion tank. ... Chapters: 00:00 Video start 00:05 Make and model of vehicle 00:21 Reported issue 00:57 Visual inspection from above 02:08 Ramp up 02:13 Visual inspection from below 04:09 Remove the lower plastic pulley cover 05:51 Place axle stand and ramp down 06:30 Remove the headlight 08:42 Remove the coolant expansion tank 11:15 Remove the power steering bottle 12:09 Remove the engine mount 13:34 Remove the alternator 21:18 Remove the thermostat housing 33:03 Replace the thermostat 38:12 Fit the new thermostat housing 45:57 Refit the alternator 52:22 Refit the engine mount 55:00 Refit the power steering bottle bracket 57:03 Refit the coolant expansion tank 58:51 Refit the power steering bottle 1:01:41 Refit the headlamp 1:03:54 Topping up with new antifreeze 1:06:09 Ramp up 1:06:13 Refit the lower plastic pulley cover Got questions? Check out my FAQ sheet for answers to the most frequently asked questions https://bit.ly/43TVVEO If any of the videos are helpful, remember to give it a "thumbs up" and consider subscribing. And if you are feeling even more generous please feel free to buy me a coffee (or a beer) using the link below; https://www.buymeacoffee.com/carjunkies Please note that the subtitles for the videos are automatically generated by YouTube's machine learning algorithms so the quality of the captions can vary. Disclaimer: @carjunkies assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk.