[EN] Ruptela FLS Eco Fuel Level Sensor installation tutorial

Full documentation: https://doc.ruptela.com/articles/#!ac... Get sample: https://www.ruptela.com/product/fuel-... Tools needed for installation: 1. Measuring tape 2. Sealant with pistol (i.e. Makroflex SX101 sanitary silicone from Henkel Makroflex AS or equivalent) 3. RS232-USB converter cable and FLS to RS232 cable 4. 1 A fuse 5. Plastic straps (290 x 3.5 mm, might vary in size) 6. Wire cutting pliers 7. Pipe cutting tool. Mandatory for FLS installation! Example: Rothenberger tube cutter 35 or similar, that allows cutting a 22 mm aluminum tube. 8. 38 mm hole saw and hole saw arbor. It must fit the cordless drill! Mandatory for FLS installation! 9. 7 mm hexagon drill head. It must fit into the cordless drill! 10. Cordless drill (recommended at least 40 Nm torque). Check if the hole saw arbor (12) fits it! 11. File tool. A sharp edge of wire pliers might be used. (not in photo) 12. External power supply, 12V portable battery (not in photo) 13. Fuel pump and vessel to drain fuel for calibration (not in photo) ------ Hello! We are Ruptela, a telematics company providing solutions for fleet management and GPS tracking. 🔵Fleet management solutions: https://www.ruptela.com/fleet-managem... 🔵Products: https://www.ruptela.com/products/ 🔵Become our service provider : https://www.ruptela.com/for-service-p... 🔵Subscribe to our newsletter: https://www.ruptela.com/news/ Stay connected with us: Facebook:   / ruptela   LinkedIn:   / ruptela   ----------------- #telematics#gps#fleet#iot#ruptela#tachograph#fleetmanagement