Vacuum Bagging a Carbon Fiber/Composite Part - Complete Video

Using the fiberglass mold created in another video, we demonstrate the vacuum bagging process by forming a carbon fiber part. Originally, this video was only available to subscribers of our newsletter. This is no longer a requirement (although please free free to subscribe anyway). 00:00 - Introduction to Vacuum Bagging 00:25 - Preparing The Mold 01:36 - Introducing & Cutting The Materials 04:17 - Testing The Vacuum Chamber 04:51 - Mixing The Epoxy Resin 05:25 - Building The Carbon Fiber Laminate 07:06 - Building The Vacuum Bag 11:54 - Demolding The Part 12:58 - Finishing The Part 13:25 - Constructing a Beaver Tail (Alternative Resin Trap) This is an updated version of the video originally entitled Vacuum Bagging a Composite Part. We’ve gone back to increase the resolution, correct the color; plus update the graphics and add some clarifying content. Freeman Mfg & Supply is a materials supplier. The thousands of hours dedicated to producing this series was done in service to our industry. If you are looking for any of the materials shown, please visit us at http://freemansupply.com (our primary website for professionals) or http://miapoxy.com (curated for the DIY market). Finally, this video was originally part of a compilation DVD entitled Making Parts, Patterns, Tools, & Molds. You can see all of those videos (in sequence and in context) on our dedicated video website at https://www.FreemanVideos.com. Or check out our YouTube Playlists. Or find your next video of interest here: Moldmaking & Casting Videos: 1 - Using Rigid Fast-Cast Urethanes for Casting Both Molds & Parts    • Using Rigid Fast-Cast Urethanes for Castin...   2 - Making Flexible Molds with Urethane Rubber    • Making Flexible Molds with Urethane Rubber   3 - Simple Silicone Rubber Molds (Without a Parting Line)    • Simple Silicone Rubber Molds (Without a Pa...   4 - Two-Part Silicone Rubber Molds (Forming a Straight Parting Line)    • Two-Part Silicone Rubber Molds (Forming a ...   5 - Moldmaking With Clear Silicone Rubber    • Moldmaking With Clear Silicone Rubber   6 - Making Molds & Casting Thin Walled Parts (& Using Color Tints)    • Making Molds & Casting Thin Walled Parts (...   7 - Making Two-Part Silicone Rubber Molds with Complex Parting Lines https://tinyurl.com/spf9z8hs 8 - Tips & Tricks for Moldmaking & Casting Parts with Intricate Detail    • Tips & Tricks for Moldmaking & Casting Par...   9 - Making Simple Multi-Cavity Molds    • Making Simple Multi-Cavity Molds   10 - Surface Casting Method #1 (featuring Gap Wax)    • Surface Casting Method #1 (featuring Gap Wax)   11 - Surface Casting Method #2 (With Brushable Urethane Casting Resin)    • Surface Casting Method #2 (With Brushable ...   12 - Using Fillers & Pourable Foam to Lighten a Casting (& More) https://tinyurl.com/2cav5em5 Laminate Toolmaking & Composite Parts Videos: 1 - Laminating with Fiberglass & Epoxy - The Basics    • Laminating with Fiberglass & Epoxy - The B...   2 - Building a Fiberglass & Epoxy Laminate Mold    • Building a Fiberglass & Epoxy Laminate Mold   3 - Vacuum Bagging a Carbon Fiber/Composite Part https://tinyurl.com/auf6d2d8 4 - Building a Laminate Tool with Epoxy Paste    • Building a Laminate Tool with Epoxy Paste   5 - Rapid Tool Making with the Repro Laminating System    • Rapid Tool Making with the Repro Laminatin...   6 - Making a Simple Glove Mold    • Making a Simple Glove Mold   Preparing Models, Molds, & Materials Videos: 1 - Prevent Your Castings & Models From Sticking to Your Molds    • Prevent Your Castings & Models From Sticki...   2 - Weighing & Mixing Resins & Silicone Rubber The Right Way    • Weighing & Mixing Resins & Silicone Rubber...   3 - Eliminate Entrapped Air in Molds & Castings    • Eliminate Entrapped Air in Molds & Castings   4 - How NOT to Ruin Silicone Rubber When Making Molds https://tinyurl.com/32uwjv3z