ส่องพระสมเด็จ หาอะไร #สิ่งที่ควรมีในพระสมเด็จ #ดูพิมพ์องค์ครู | EP. 25

The Best Video for Understanding the Material of Somdej Phra Amulets What to Look for in Somdej Phra Amulets Hello friends, have you ever noticed what you're looking for when you look at amulets or when others look at amulets? You can tell by the mold, but what do they look for with the naked eye? But if you look at the mold, you can tell by the naked eye. But what do they see with a microscope? In this March 4th video, I'd like to invite a Somdej Phra Wat Rakhang amulet, Phra Prathan (Buddha image) with a grooved chest, a popular amulet with a yellowish-white color. I'll explain what we see and what we should see when we look at a Somdej amulet. 1. Buddhist Art Let's start by observing Buddhist art, which we can see with the naked eye. This amulet is a Buddha image sitting on a three-tiered base within a bell-shaped niche. For the Phra Prathan amulet, we'll examine the clarity of the mold, the depth, the rise, and the curvature of the lines, giving it dimension. Middle-era Somdej amulets are delicately molded, with a limited amount of material and a mold outline. For the Phra Prathan or large amulet, those who click on this video will immediately recognize it. 2. Amulet Material The nature of this amulet's material This zone is for soft, fine-grained, white amulets with a yellowish tinge from soy sauce oil. When examining the surface of a Somdej amulet, we'll look for three points. We also need to assess the condition of the amulet, such as whether it's been stored on a shelf, in a crypt, in a box, in a frame, or used without a frame. The dryness, moisture, and surface stains will vary. External Surface Oldness and Aging When examining old amulets, we look for age and natural changes. The surface of a Somdej amulet resembles a shell formed by calcite growth. The older the amulet, the thicker the shell will appear. We'll also look for signs of age and erosion of the amulet's surface over time. Especially the back, which is a crucial point when examining a Somdej amulet. The back may be smooth or show marks from being cut. We'll look for signs of age, erosion of the material, various materials, and cracks in the material, which are easier to detect than the front, as there are more difficult areas for molding. The color of the amulet's surface has changed due to age. There are traces of herbal juice or oil in the amulet. It may appear dry, but upon closer inspection, it will be moist. Stain traces of herbal juice or oil will appear mixed in. It's mixed into the amulet's surface, appearing in gradual patches, not layered. Fissures and Pits When we find chips or pits, we look for age on the inside of the chip or pit. For older chips, we'll see white residue or calcite grains. Around the pit or crack, there are pits with sharp edges, which are difficult to decorate. Softness Softness is a very important factor in looking at a Somdej amulet. Some people call it "soft and smooth." This is the charm of a Somdej amulet, making it extremely difficult to imitate. When we look at the amulet, it appears soft because the softness comes from the natural changes of the raw plaster material, which emerges from within the material and forms a protective covering. However, if it's a finished plaster amulet or a late-era amulet that has been heated to quickly set, the amulet's surface will be stronger and subject to less natural changes. Surface in the grooves The surface in the grooves is exposed to little or no contact, and is exposed to less wind or air, so it has less ability to absorb moisture. What we'll be looking for is moisture. Moisture in the grooves should be higher than on the surface. The amulet's surface in the crevices or pits will not be as easily corroded as the outer surface. Staining from herbal juice or oil often accumulates with dust. Sides We'll look for wrinkles and grooves on the edges. The surface is not smooth and tight, with cracks, creases, and ridges on the edges. We'll see shifting, scraping, or scraping marks. 3. Substances When examining the amulet's surface, we must consider two levels: 1. Surface Substances This refers to the substances we can see on the surface of the amulet. Required substances in a Somdej amulet include: Somdej powder or magic powder, which appears as a yellowish-white lump. Black powder or palm leaf powder, red clay, black iron, and tamarind flower ore. Other secondary substances include algae stains, gold filings, and clear white mineral lumps. 2. Substances beneath the surface For @4meena, the substances beneath the surface are an important consideration. The surface of an old, raw cement amulet will be clear, not opaque. We must be able to see the substances beneath the surface. Looking deeper to see the various materials, you'll need to look in a bright light or use a ring light for easier viewing. We'll examine the erosion and wilting of the materials beneath the surface to ensure they appear natural and uniform, as they were mixed together du...