aata chakki overload problem .aata chakki overload problem solved.

aatachakki overload problem aata chakki overload bta Rahi h aata chaki showing overload when it's kar is empty floormill showing overload When the main machine of the pulverizer vibrates severely, it should be shut down and checked immediately to see if the grinding roller and grinding ring of the machine are deformed. The deformation of the grinding roller and grinding ring will be very large Vibration and noise. Therefore, the grinding roller and grinding ring should be replaced in time. In addition, due to the tightness of the anchor bolts and the looseness of the anchor bolts, the main machine cannot be properly fixed. When the material enters, the rotation of the motor will cause the main machine to sway, causing large vibration failures. If this happens, it should be shut down immediately. , Tighten the anchor bolts. #aata machine #aata chakki #small aata chakki #flour mil Of course, even the best equipment still needs maintenance. For the problem of the parts of the flour milling machine, the parts of the equipment should be inspected every time. If wear or damage is found, it should be replaced in time. If it is not damaged, it should be cleaned up. After a period of time, the equipment should be cleaned up to clean up the internal garbage and other materials. Only if the equipment is well maintained, the equipment will last longer and the flour milling machine will work in good condition every time.