Filtro solar Urth ND100000 + Tamron 150-500mm: equipo práctico para fotografiar eclipses

In this video, we demonstrate a simple and highly practical combination for photographing solar eclipses: the Urth Solar ND100000 Plus solar filter mounted on the Tamron 150-500mm Sony E lens. The goal is to explain how to prepare your equipment before the eclipse, how to correctly attach the solar filter to the front of the lens, and what precautions to take to protect both your camera and your eyes. We also explore initial settings that can serve as a starting point for capturing sharp photographs of the Sun during an eclipse. The combination of the Urth ND100000 solar filter with the Tamron 150-500mm lens allows you to work with a longer focal length to capture a larger Sun in the frame, while maintaining adequate light reduction for solar photography. Therefore, it's a very attractive option for those who want to prepare their eclipse photographs with practical and relatively portable equipment. We also explain why the filter should always be attached before pointing the camera at the Sun, why it should not be removed during the partial phases of the eclipse, and why it is important to check the correct diameter, the filter's attachment, the cleanliness of the threads, and the stability of the assembly before starting to photograph. Important: This type of filter is designed for camera photography, not for looking directly at the Sun with the naked eye. For direct visual observation, certified solar eclipse glasses or specific viewing systems must always be used. Recommendations for using the Urth Solar ND100000 filter with the Tamron 150-500mm lens: https://foto321.com/compra/filtro-sol... https://foto321.com/compra/tamron-150... Attach the filter before pointing at the sun. The solar filter must be installed on the front of the lens before framing, focusing, or performing any tests. Check the correct diameter. The Tamron 150-500mm Sony E uses 82mm front filters, so it's important to use the correct diameter or a secure adapter ring system. Make sure the filter is screwed in tightly. It should not be loose, tilted, or partially separated from the lens. Do not use regular ND filters to photograph the Sun. For a solar eclipse, you need a specific solar filter like the Urth Solar ND100000 Plus. Do not look directly at the Sun. This filter is designed for camera photography, not for direct visual observation. Test your shots before the eclipse. Practice focus, framing, and exposure in the days leading up to it so you don't have to improvise during the event. Use a tripod whenever possible. At 500mm, any vibration is noticeable, so a stable tripod greatly improves sharpness. Turn off autofocus if necessary. Once you have the edge of the Sun or a visible reference point in focus, it may be better to switch to manual focus to avoid accidental changes. Shoot with a timer or remote shutter release. This reduces camera shake caused by handling the camera. Check the exposure on the screen. Start with a low ISO and adjust the shutter speed according to the histogram, avoiding overexposing the solar disk. We especially thank @robisa.es and @tamron_europe for their collaboration in allowing us to showcase this combination in a real-world application for eclipse photography.