Begini Cara Menambah Suply CATV Signal Amplifier Untuk Boster Atas

Step one: Remove the input connector from the module and install a 102pF ceramic or mylar capacitor. Step two: Remove the PSU diode connected to the transformer and replace it with a single 1A diode (do not install it the wrong way around). Step three: Disconnect the two secondary cables from the transformer. Move one cable to the input of the new single diode, and the second cable from the transformer to the connector on the - or body. Step four: Connect or jumper the cable from the input connector (parallel to the capacitor) to the single secondary transformer cable (parallel to the single diode). Hope this tutorial is helpful. Please share, like, and subscribe. Good luck! 👍👍 #catvsignallifiersouer #bostertanaka