Instalação e configuração do Sensor de Presença Exatron

In this video, we'll show you how to install and configure Exatron's DIP Switch Front Presence Sensor. The DIP Switch Front Presence Sensor (LESFZDDP) is an intelligent control designed for timed load activation, configurable via an external DIP switch. It detects the movement of heat sources such as people and vehicles using TECHNICAL CHARACTERISTICS Voltage: 100-240V~50/60Hz; Consumption: less than 1W; Coverage: 110° with a range of up to 12m at an ambient temperature of 25°C, at a height of 2.1m; Dimensions: 96x90.3x58mm; Installation: indoors; Settings via DIP switch; Configurable timer with time countdown (pulse, 1, 3, 5, 8, 10, 15, and 25 minutes); Brightness sensor that allows you to choose the light level at which the sensor will activate the lights, avoiding energy waste; Sensitivity level that allows you to adjust the desired motion detection level; LED operation indicator; Provides up to 75% energy savings; Detects heat sources (people, cars, etc.) must be at least 3°C different from the temperature of the environment where the sensor is installed; Exclusive Inrush Control Technology, a near-zero switching system (sinusoidal), increasing the lifespan of the load and sensor; Controls any type of light up to the maximum power indicated in the load capacity table; Components: Plastics, electronics, and metal alloys; Protection rating: IP32. Control Power: Electronic/LED Halogen Voltage 127V 180W 400W 220V 280W 800W