Zonda as a dry powder inhaler

The Zonda inhaler should only be used with the bottle of capsules that will be provided in the same pack as the inhaler. Do not reuse the inhaler for another bottle of capsules. Discard the Zonda device after 30 uses. 1. Pull the dust cap upwards. 2. Hold the base of the inhaler firmly and open the mouthpiece by pulling it upward. 3. Remove a capsule from the bottle immediately before use and close the bottle tightly. Place one capsule in the centre chamber in the base of the inhaler. Do not store the capsule in the Zonda inhaler. 4. To avoid the risk of choking, NEVER place a capsule directly into the mouthpiece. 5. Close the mouthpiece until a click is heard, leaving the dust cap open. 6. Hold the inhaler with the mouthpiece upwards and press the piercing button completely in once. Release the button. 7. Breathe out to empty the lung. It is important to do this away from the mouthpiece. 8. Place the device in your mouth. Close your lips around it and breathe in slowly and deeply. 9. Hold your breath for 5 to 10 seconds. 10. Exhale slowly. 11. Check if the capsule is empty. 12. Repeat previous steps to empty the capsule completely. 13. After use, open the device again, and tip out the empty capsule. 14. Clean the device with a dry cloth after each use. 15. Close the dust cap. 16. Rinse your mouth with water after using the inhaler, do not swallow.