Satellite 400 G3 - Polishing a Concrete Garage Floor
The Satellite 400 is the smallest of the Satellite range. This machine is 2 HP and only weighs about 100 Kg. Watch as we take an existing 55m2 garage floor and give it a burnished finish. The original plan was to just take it to a moderately satin finish but we eventually took it a bit further. :-) This machine achieved about 25-30 Square meters an hour per pass and we did 8 passes. It is quite a solid machine and can produce a very acceptable result as shown.
▶︎
Polished Concrete vs Epoxy Coating
▶︎
How to use Floorex 480 Satellite Grinder - Peninsula Products Concrete Equipment Hire Specialists
▶︎
Simple, Sweet & Free – Country Guitar Classics for Relaxed Relaxation across the Moonlit Ranch
▶︎
How to pour a terrazzo flooring | SWR Craftmanship
▶︎
Grind and Seal vs Polished Concrete Floors: Which is Better?
▶︎
Maintaining Polished Concrete Floors
▶︎
Polishing a House Floor 100 Grit #polishconcrete #concreterestoration
▶︎
Garage Epoxy Floor Prep - DIY Concrete Grinding
▶︎
Comparing Floor Scrapers
▶︎
Watch this BEFORE you buy Swisstrax. 5 Things to Consider
▶︎
How to Polish Old Concrete Floors to a 1500 Grit High Gloss Shine With A Concrete Floor Grinder
▶︎
Concrete Polishing From Start To Finish : 10 Step Grind
▶︎
Unbelievable Workers Compilation | Working with Talented Engineers #45 #adamrose #smartworkers
▶︎
Australian Made Concrete Grinders
▶︎
Coating a garage floor - step by step
▶︎
DIY - Step-by-Step Garage Floor Polishing with WerkMaster's The BOSS Concrete Floor Grinder/Polisher
▶︎
How to Prep for Floor Coatings | Grinding
▶︎
DIAMOND PAD Concrete Polishing by Ultra Chem Labs
▶︎
How to Use a Concrete Grinder
▶︎