Michael's 2016 Minimoog Reissue Repairs/Mods (by synthpro)

Hey Guys, In this video I take you along the adventure of making repairs to a 2016 Minimoog Reissue that was having troubles. Found an assortment of little issues as well as did some things to help the tone just a bit. Here is technical info that may be helpful: For those needing replacement power supply, the Mean Well Part # is P25A14E. (Note: plug will have to be modified with a female XLR 4 pin) Pinout of XLR 4 pin: Pin 1= -15V Pin 2= +15V Pin 3= Ground Pin4= +5V This Mean Well supply is already discontinued but as long as you get a supply with these current specs, it can be modified to work: +5V= 2.5A +15V= 500mA -15V= 300mA Screws for the interface boards, Power supply, and keyboard circuit board: #4-40 1/4" These are the screws without lock washers so I recommend installing some or using some medium strength thread lock. Thanks for watching! Sincerely, Jareth