Як приборкати свого китайця: детальне налаштування гібридного інвертора

In this video, I will go through the setup of the Anern Eco hybrid inverter in detail, step by step. You will learn how to properly configure the inverter to work with solar panels, backup power and batteries, and also get useful tips on optimizing its operation. The video will be useful for those who want to achieve maximum efficiency from their solar power plant and ensure energy independence for their home. Subscribe to the channel so as not to miss new useful videos! 2:51 - 00 reset to factory settings 3:40 - 01 energy usage priorities 6:22 - 02 maximum battery charge current 7:13 - 03 operating mode 9:15 - 05 battery type 10:33 - 06 overload at overvoltage 12:07 - 07 reboot at overheating 12:37 - 09 network frequency selection 12:48 - 10 network voltage 12:54 - 11 battery charge voltage from the network 14:00 - 12 to what voltage to discharge the battery when operating in SBU mode 14:46 - 13 to what voltage to charge the battery and switch to SUB operating mode 16:40 - 16 battery charge priority 18:14 - 18 buzzer 18:30 - 19 return to the initial display? 19:20 - 20 illumination 19:40 - 22 main source disconnection signal 20:11 - 23 bypass activation during overload 21:28 - 25 error recording 21:39 - 26 maximum battery charging voltage 22:30 - 27 floating voltage 23:01 - 29 inverter disconnection voltage from the battery 23:42 - 30 battery equalization 23:49 - 31 battery cell equalization voltage 24:10 - 33-36 what not to change 25:11 - 37 whether to feed energy into the network 25:28 - 38 how much to feed into the network 25:44 - 39 screen backlight 25:53 - 41 additional output 26:38 - 42 minimum voltage power supply for additional output