NIKON COOLPIX P1100/P1000 - QUICK RELEASE PLATE - A must-have accessory if you have these cameras

In this video, I'll showcase the quick-release plate for the Nikon Coolpix P1100, which is also compatible with the Nikon Coolpix P1000. If you don't use this quick-release plate, the camera body puts a lot of stress on the quarter-inch thread underneath it when mounted on a tripod, and it could then snap under pressure after some time. Therefore, it is a must-have accessory for this camera. Designed specifically for the Nikon P1000 and P1100, this Arca swiss compatible quick release plate attaches to the barrel of the lens adding stability to the camera. Extending the base plate enables you to mount the camera at its extended centre of gravity for stable footage. Designed To Stabilize. Custom designed to snugly fit around the barrel of the P1000/1100. The Camera snap-fits into its place tightly, with no side to side wiggle room due to the front notch and back tripod screw creating a 4 point stabilization system. There is nowhere for the camera to go! 3d Printed with Carbon Fiber PETG. This filament creates High Strength parts that are made to last. It has good toughness, wear resistance and flame resistance, suitable for any conditions your camera can handle. Each layer is 0.2mm thick creating a very strong adhesion with 99% infill for a nice looking finish. Arca Swiss Compatible Designed to fit the widely popular Arca-Swiss Quick Release Mount style. This plate can be mounted anywhere from the front to the back of the camera. 1/4 20 Threaded insert Added 2 seperate 1/4 20 Threaded insert near the front of the mount increasing compatibility with other systems. You can attach any other quick release plate to the bottom of this one creating a strong base for your camera. Spread the Weight Place the camera’s centre of gravity above your tripod by attaching the tripod near the front of the quick release plate. When zoomed all the way in, it stays well balanced. Thanks for watching. I hope this video helped you out. The link below is where I purchased it from. https://www.etsy.com/uk/listing/10117...