How to set up your Rockville RX230 2 Way Stereo / 3 Way Mono Crossover with XLR Input and Output

Find us on Facebook.com/RockvilleAudio RockvilleAudio.com Rockville: https://www.rockvilleaudio.com/rx230/ Amazon: https://www.amazon.com/dp/B01LZUQ4OU?... ebay: https://www.ebay.com/itm/302075519834... Features: Rockville RX230 2-way Stereo / 3-way Mono rack mountable crossover Ability to mix 2 channels output 24dB/Octave filters Mute switches Channel Gain Control: 0 to +12 dB Low Frequency Level Control: -8 to +6 dB High Frequency Level Control: -8 to +6 dB Low Frequency to High Frequency crossover: 100Hz to 1 Khz x10 range: Changes • Low Frequency to Mid Frequency from (100 Hz to 1 kHz) to (1kHz to 10 kHz) Switchable 2-way stereo or 3-way mono operation Subwoofer out Subwoofer X-Over Freq ( 30Hz – 200Hz ) adjustable Subwoofer Gain -6 to +6 dB Specifications: Each output is -3 dB at the selected crossover frequency value. Outputs are essentially flat within their relative passbands. Distortion: Less than 0.02% THD @ +4 dBu,@ 1 kHz Hum and Noise: Crossover controls set @ 1 kHz, all level controls set at 0 dB; 22 Hz to 22 kHz, unweighted gain @ 0dB(ref +4dBu) - 90dB Low Frequency Output: -86 dBu below 80 dB High Frequency Output: -84 dBu below -78 dB Maximum Input Level: +14 dBu, (channel gain @ 0 dB input level controls set at 0 dB) +22 dBu Maximum Output Level: +22 dBu, unbalanced +28 dBu, balanced Input Impedance: 10k ohms unbalanced Dimensions: 19 x 4.85 x 1.8 inches Gross weight: 4.18 Lbs Connectors: Inputs: XLR Balanced Outputs: XLR Balanced Power Requirements: 120V AC, 50/60 Hz, 20 watts 110-120V voltage