2003-2007 Honda Accord Starter replacement

The vehicle had cranking issue where it crank and died. So we ended up replacing the starter since the battery was still good. Tools: Electric 3/8 impact wrench https://amzn.to/2RHhFj3 18" 1/2 inch flex ratchet https://amzn.to/4gxGF43 3/8 Ratchet https://amzn.to/2VPMaCo 1/2 to 3/8 adapter https://amzn.to/2SQjRlp 3/8 and 1/2 u joint set http://amzn.to/2awcY1Z 3/8 14mm socket http://amzn.to/2b0vAfI 3/8 17mm socket or http://amzn.to/2aESDL1 1/2 17mm short socket http://amzn.to/2awd6P5 3/8 10mm socket http://amzn.to/2aCThW4 3/8 12mm socket http://amzn.to/2bhlB64 3/8 12mm deep socket https://amzn.to/2sqvkg4 3" 3/8 wobble extension http://amzn.to/2aweq4t needle nose Pliers set http://amzn.to/2awcdGr Phillips screw driver http://amzn.to/2ncjkgK ring nose pliers set http://amzn.to/2aEVljA diagonal cutter https://amzn.to/2ty0sej zip ties Parts: Starter Torque specs: 8.7 ft. lbs - Engine cover nuts 16 ft. lbs - Throttle body nuts and bolts 16 ft. lbs - Bottom intake bracket bolt 8.7 ft. lbs - Wire harness bracket bolts 16 ft. lbs - Intake manifold nuts and bolts 33 ft. lbs - Starter inner bolt 47 ft. lbs - Starter outer bolt 7 ft. lbs - Starter top ground cable nut like and share this video! Like us on Facebook http://bit.ly/nutzaboutbolts1 and SUBSCRIBE! http://bit.ly/NutzAboutBolts2 Check us out on http://www.nutzaboutbolts.com