How to use Infinity CM2 MTK to flash Mediatek firmware

Download links & Text format @ https://forum.hovatek.com/thread-2182... This video explains how to use Infinity CM2 to flash firmware to a Mediatek (MTK) device Its important to only flash firmware for your device to avoid bricking it Drop a comment below if you have questions or reach out to us on the following platforms: Website: https://www.hovatek.com Facebook:   / hovatek   Twitter:   / hovatek   Google+ : https://plus.google.com/+Hovatek 00:10 In this video tutorial, I'll be explaining how to flash a Mediatek Android phone using Chinese Miracle 2 MTK 00:18 module. You need to have the module which you're going to be installing and the firmware which you're 00:27 going to be flashing. I'll be flashing in scatter format as you can see. You should also have your 00:34 VCOM drivers installed, we have a guide on how to do that so check that out on our Forum. 00:39 Now, once you've done that, install this CM2 MTK module. You should have the hardware dongle 00:53 on standby. If possible, you can have it connected to your PC while you're installing the module ok? 01:02 So you don't forget to connect when you launch. [installing both MTK modules] 01:39 Now, make sure your dongle is connected to the PC's USB port then launch the Infinity CM2 MTK shortcut. 01:52 It takes a while to come up so just be patient alright? Now, select your phone's chipset 02:11 under Settings - CPU. We have a guide on how to know your phone's chipset. Now, once you do that, 02:16 you go to the flash tab. Depending on what you want to flash (bin or scatter format), you tick 02:23 the appropriate radio. I want to flash in scatter format so I'm going to be ticking scatter. 02:29 Now, under Settings, you have some boxes. I'm going to untick everything. You can decide to tick any. 02:38 Once you're done with that, you click on Scatter and then a Window should popup. Now, in this Window that 02:45 pops up, navigate to the location where you have your firmware / rom which you want to flash 02:53 then select the scatter file and click on Open. Now, the firmware / rom should get detected. 03:02 Now, click on Flash and you should have ====Wait for phone.. Power off the phone. still with battery inside 03:18 then connect it to the PC via the USB cord and you should have detection. Flashing should begin. 03:27 Its very important you don't interrupt flashing ok? Alright! Great! So flashing is done. 03:38 That's basically how to flash a Mediatek Android phone using Chinese Miracle 2 or CM2 MTK module. -------------------------- Hire Or Consult Us https://www.hovatek.com/remote Join Our Training https://www.hovatek.com/training