Fox ESS at SNEC with the CQ7 battery, All-In-One Hybrid Inverter and H3 Pro three-phase inverter

Walking the Fox ESS booth at SNEC 2026 in Shanghai — the products that matter for the Australian market right now: the new CQ7 high-voltage battery, the H3 Pro three-phase hybrid inverter, the new Power Q single- and three-phase all-in-one systems, and the L and A Series AC EV chargers. I get hands-on with each, talk through the install detail, and flag what's relevant for installers heading into the 2026 season. The CQ7 is Fox's latest modular HV battery — 7.02 kWh LFP per module, 90% DoD, plug-and-play stacking, and CAN comms back to the inverter, scalable to around 98 kWh in a single stack. The H3 Pro rounds out the three-phase hybrid line: 10–30 kW, three MPPTs, dual battery inputs, integrated three-phase EPS and IP65 for outdoor mounting. New for this year is the Power Q all-in-one range — available in both single-phase and three-phase, with scalable LFP battery integration in one cable-free, floor-standing unit. It's built around a integrated gateway with a 63 A breaker for whole-house backup, up to 1C charge/discharge for fast response, and is squarely aimed at VPP applications. Rounding it out, the EV chargers — the tethered L Series and the tethered/untethered A Series — both bring solar linkage, dynamic load management, scheduled charging and full FoxCloud 2.0 integration in 7.3 and 11 kW variants (A Series up to 22 kW). 🔗 LINKS Fox ESS Australia: https://au.fox-ess.com/ This is independent walkthrough content from the show floor — not sponsored, not endorsed by Fox ESS. Always check the current datasheet and AS/NZS compliance for your specific install. 👍 If this was useful, subscribe for more from the test bench and the trade-show floor. #FoxESS #SNEC2026 #SolarBattery #HybridInverter #AllInOne #PowerQ #EVCharger #SolarInstaller #EnergyStorage #BESS #Australia #RenewableEnergy