COMO TROCAR O OLEO DO MOTOR DA NMAX de 2021 a 2026

Video funnel: https://mercadolivre.com/sec/1bi79H6 Changing the oil on a Yamaha NMAX is an essential procedure to keep the engine healthy and the ride smooth. The recommended interval is usually every 5,000 km (after the first service), but many owners prefer to change it every 3,000 km due to severe use in urban traffic. Here is a simplified step-by-step guide for you to do it yourself: 1. Preparation Recommended oil: Use 10W-40 oil (API SL specification or higher and JASO MB standard). The NMAX uses approximately 900 ml. Tools: 12 mm open-end or socket wrench, a funnel, and a container to drain the used oil. Tip: Start the motorcycle for 2 or 3 minutes to slightly warm the oil; this makes it drain more easily. 2. Step-by-Step Instructions Draining: With the motorcycle on its center stand, locate the drain plug on the lower left side of the engine. Place the container underneath and loosen the plug with a 12mm wrench. Cleaning the Screen Filter: While the oil is draining, you can remove and clean the filter screen (located behind a spring in the drain plug). Use decarbonizing spray or kerosene. Closing: Replace the screen, spring, and drain plug. Tighten firmly, but without applying excessive force to avoid stripping the threads. Adding Oil: From the right side of the motorcycle, remove the dipstick and add 900 ml of new oil using a funnel. Checking: Clean the dipstick, insert it (without screwing it in) to check the level.