Husqvarna 592XP(G) Replace Inlet Pipe-Intake Manifold

How to replace the intake manifold, or inlet pipe, assembly on a Husqvarna 592XP chainsaw. Process is nearly the same for the 592XPG. Symptoms of a failed intake manifold can be: runs poorly, idles high, revs when coming out of the cut, or throttle seems "stuck" open. 0:00-0:18 Symptoms of Failure 0:19-0:37 Tools Needed 0:38-0:54 Remove bar/chain/top cover 0:55-1:09 Visible Crack in Boot 1:10-1:16 Remove Air Filter 1:17-1:50 Removing Carburetor Base 1:51-2:40 Autotune Wires and Routing 2:41-3:06 Removing Carb Base Screws-T20 3:07-3:29 Remove Rubber Retainers 3:30-3:46 Remove Throttle Cable 3:47-4:20 Remove Carb Base 4:21-4:28 Remove Carburetor 5:00-5:21 Remove return primer line/rubber retainer 5:22-6:42 Remove intake manifold 6:43-6:56 Check piston for scoring 6:57-7:43 Install intake manifold 7:44-8:05 Install screws and retainer 8:06-8:36 Install return primer line 8:37-9:11 Install carburetor and throttle cable 9:12-10:57 Install air filter base 10:58-11:28 Install aux air butterfly 11:29-11:49 Install air filter base screws 11:50-12:13 Function check throttle/choke/shutoff/primer 12:14-13:15 Connect wiring 13:16-13:34 Install air filter/top cover/bar/chain 13:35-13:50 Test run