💎TUTORIAL| CAMBIO de SELLOS a HIDROLAVADORA INDUTRIAL🛠️(fácil y rápido)✅

💪In this video, we show you how to replace the seals on a pressure washer with a 5hp Comet pump.👍 TUTORIAL |🛠 WATER IS GETTING INTO THE OIL! LEARN HOW TO REPAIR AN INDUSTRIAL PRESSURE WASHER🤯    • TUTORIAL|🛠 PASA AGUA al ACEITE CONOCE como...   This unit started experiencing a problem with low pressure. This can be due to several factors, but one of the most common issues with this type of industrial pressure washer is the deterioration or damage of the internal seals in the pump head. It's also worth mentioning that there are a couple of parts that can be reused. These are distinguished by their size and weight, and they are the only parts made of the same material as the seals, which are bronze. Therefore, it's important not to discard these parts. The seal kit contains a set of three seals, as each pump piston requires its own set. This allows you to replace the seals on all three pistons. However, we often find that only one or two seals are damaged. In this case, you can replace the damaged seals while leaving the good one in place. This won't prevent the unreplaced seal from getting damaged, but it can be a helpful tip to save money on accessories, since each seal kit costs approximately 600 to 800 Mexican pesos, depending on the supplier. In our case, the equipment showed wear and tear. When a problem like this occurs, the repair won't always be successful, or it might not work at all. The wear isn't visible, but upon closer inspection, you can feel a rusty edge compared to the other two holes. ONLINE STORE: https://www.lavadologan.com/ FOLLOW US ON OUR OFFICIAL PAGES: Facebook:   / lavadodetrailersculiacansinaloa   Instagram:   / logan_lavado   TikTok: https://vm.tiktok.com/ZMdXoRUad/