Jak wymienić koło w samochodzie? Poradnik dla kierowcy, który nigdy wcześniej nie wymieniał koła!

INSTRUCTION: 1. We check whether in our wheel (as in the film) there is a screw cap of the wheel, i.e. a protective element that makes it difficult to steal the wheel. If it occurs, then we check what kind of key you can open this security and yourself such a key (in the film Allen) we organize and always in the car next to the key for the wheels and jack (jack) we have. 2. Apply the handbrake firmly and block other wheels that are not unscrewed with stones so that the car does not move during the exchange (which can damage the jack). Whenever possible, change the wheel in the car when the car is on an even surface. 3. When the car is still on wheels, unscrew the key to the wheels (I recommend buying such a telescopic key (as in the movie) at the service station, it is very comfortable and MUCHLY makes it easier to unscrew the wheel in every situation (especially the woman!)) By half a turn of each screw . 4. When the bolts are loose, pull out the jack and fasten it to the right place in the car where there is a special place to fasten. Next, we raise the car by turning the handle (the woman will handle it). 5. When we raise the car so much that the wheel will be above the ground, then the key is unscrew all the bolts and pull the wheel. 6. Pull out the spare wheel (spare) and put in place the old wheel, holding the wheel with one hand, insert the second screw and screw in a little, then screw the second screw diagonally to the already screwed in and tighten with your fingers as much as we can, then tighten with the key to resistance but not to the max, now we screw the rest of the bolts and all of them tighten as far as the raised circle in the air allows us. 7. Now we leave the car from the elevator and when the lift is gone, now the key is tightened to the max until we hear such a screwing, or we just feel that it is tight, there is no exaggeration, remember that if we have a telescopic wrench, it is easy to turn the screw, and it is not advisable :) 8. Now we can apply a blank if we have it, put the old wheel in place of the item and we can go further. NOTE: It is necessary to go to the vulcanization plant as quickly as possible and repair the wheel, again to make the wheel change operation, to make the stock available, and the old repaired wheel was in place. INFO: If a woman wants to be independent, she should ask her friend, friend, friend, lover whom she wants and ask him to assist with such a simulated wheel replacement, so that there is never a situation that the woman is driving alone and does not know what to do, when this situation will happen to her. Doing this once, will give you confidence during your lifetime drive, and by the way you will be sure that you have all the necessary tools in your car and a spare wheel (inflated) in case you catch "KAPCIA" Broad Way! :) If the video comes in handy, give it a thumbs up, subscribe to our channel and comment on the video. Thanks to this you will help us in development, so that further guides will appear for you here. • JOIN FORUMWIEDZY • • Subscribe to Forum Forum: http://www.youtube.com/c/forumwiedzy?... • Facebook:   / forumwiedzypl   • Twitter:   / forumwiedzy   • Instagram:   / forumwiedzy.pl   • Google+: https://plus.google.com/+ForumWiedzy • Website Blog: http://www.forumwiedzy.pl Join the ForumWiedzy on social media and stay up to date!