Multicolored Inlays - CNC Epoxy 101

Epoxy Inlays - this time it's war! Building on our previous Epoxy tutorial, we're now going to introduce some more colors into our inlay by reproducing this famously evil corporate film logo. Using Carveco Maker, Leighton will take you step by step through setting up your model in Carveco Maker, importing images, adding text, generating toolpaths and pouring epoxy. This time we'll be cutting pockets into the cured epoxy, creating the cavities we need for the four different colors we'll need to make up the complete logo. Be sure to subscribe for our next video where we’ll be showing how we made ‘The Beast’ - our 15-pour tree-trunk inlay! For more information on Carveco Maker, please visit https://carveco.com/carveco-software-... --------------------------------------------------------------------------------------------------------- Chapters: 00:00 - Introduction 00:45 - Carveco Maker 25:14 - It happens... 27:39 - Mixing Epoxy 29:44 - Black pour 33:36 - Yellow pour 34:51 - Grey pour 35:51 - White pour 36:10 - Surfacing 38:41 - Cut out 43:02 - The finished piece For more information, please visit our website: https://www.carveco.com​​​​​​ Check out our tutorials, help and advice section here: https://carveco.com/support Our social medias: Facebook -   / askcarveco   Instagram -   / askcarveco   Twitter -   / askcarveco   --------------------------------------------------------------------------------------------------------- #cnc #epoxy #resinart #woodwork #maker #makersgonnamake #alienvspredator #cadcam #epoxyresin #signmaking