🔹 Cómo es la Limpieza de Cabezal inyectores Epson

How to thoroughly clean and unclog Epson EcoTank printer nozzles effectively and without spills and without staining the inside of the printer. ⚠️ATTENTION CAUTION READ👇 DO NOT WET, DO NOT IMMERSE the injector head, moisture causes a short circuit in the printer electronics. DRY the injector head before mounting. USE THINNER specifically compatible for printer ink, Do not USE alcohol. Do not USE water, it causes serious damage. If after the manual cleaning it still does not print, several automatic cleanings from the printer utilities will be necessary to extract the air from the pipes and circulate the ink. May need to stand for 12 hours after self-cleaning for proper printing. If the Automatic cleaning does not correct the NO PRINT problem, a manual and deep cleaning is necessary. A long time without printing can clog the nozzle because the ink dries. May need to stand for 12 hours after self-cleaning for proper printing. The side cover comes out by pressing its lower part and at the same time pushing upwards. In this operation only the head is disassembled, the printer is not disassembled. Removing the head allows you to see the injection of the cleaning liquid and not stain the printer. It is possible to inject the liquid directly without disassembling the head, it is necessary to put a very absorbent paper underneath. Valid for Cleaning the print head of Epson ET2500 Printers, ET2600, ET2650, EPSON L355, Epson L455. _______ 00:00 | introduction 00:18 | disassembly 02:20 | Cleaning 03:12 | Mounting 04:29 | end check __________ I share my experiences, the head is a delicate component and its handling could have risks of damage to the printer. It is your responsibility. ________________ EPSON ECOTANK PRODUCTS👇 https://www.amazon.es/shop/javiery70/... CLEANING LIQUID KIT 👉 https://amzn.to/3C93lGE PRINT HEAD 👉https://amzn.to/3zfephe PADS 👉https://amzn.to/39nfMwp EPSON INK 664 👉https://amzn.to/3aS24Cw EPSON ECOTANK PRINTER: 👉https://amzn.to/2yTNYDu ______________________ TO SUBSCRIBE 👉   / javiery70   If you liked it, please do not forget to "like", thank you. _________________________________ DIFFICULTY: Medium DURATION: 1 hour ________________