OMPHOBBY M2EVO servo & main blade 0 pitch setting, collective pitch setting、サーボ＆メインブレード0ピッチ設定

This video shows how the M2 V2 and M2 EVO are always set up by the controller before shipping to customers who purchased the aircraft from Neoheli. Almost 100% of the aircraft shipped from the factory do not have the correct servo linkage length and the swash is not level, so the main blades do not have 0 pitch. If these are not set properly, the maximum +100 and minimum 100 pitch angles of the collective pitch cannot be set to the same +/ pitch angles for the upper and lower blades when the main blade pitch angle is set to 0 degrees with the IDLE UP2. If the above settings are properly made when performing 6-axis gyro calibration, the hovering stability of the aircraft will be greatly enhanced. If the rescue function is accidentally used during 3D flight, for example, switching to 6-axis mode will make it easier to return to a normal attitude without a large aircraft drift. This will greatly help prevent the aircraft from crashing.