Güvenlik Kamera Sistemi İncelemesi | Adım Adım Kurulumu | HIKVISION

Security Camera Installation and Review | Step-by-Step | HIKVISION Camera link https://app.hb.biz/nGuDbmuL81xb NVR link https://app.hb.biz/FW99BpF467UP Gigabit PoE switch link https://app.hb.biz/s3C8mgrQ9zxN Standard PoE switch link https://app.hb.biz/NYRbETf98seo Hard disk link https://app.hb.biz/ZNIRkJmzNOuz Cat6 cable link https://app.hb.biz/DKiJGqUKXriK HDMI cable https://app.hb.biz/o91mSQpgpuKq Cable tester https://app.hb.biz/DGANMjlhvTyN Next Generation Network Pliers https://app.hb.biz/LuiPWbylgveX In this video, I explain step-by-step and through a real-world application how to install a security camera system in an area with approximately 100 meters between two different locations. 📌 This setup is designed as: ✔️ 2 different locations ✔️ 7 cameras ✔️ 16-channel NVR ✔️ PoE switches ✔️ PoE supported up to 300 meters ✔️ Closed system operating without internet connection The video details: 🔹 Wired vs. wireless comparison 🔹 Why was a wired system preferred? 🔹 What is a PoE switch and how to choose one? 🔹 NVR connection logic 🔹 Camera IP setting 🔹 Long-range tests 🔹 Ethernet cable (RJ45) crimping 🔹 Recording time calculation 🔹 Night vision, IR, and image settings 🔹 Motion detection and recording types Explained with real-life experience. ⚠️ This video is for educational purposes only. Those without knowledge of electricity and infrastructure should exercise caution when performing this installation. Product links can be found in the description. You can write your questions in the comments below 👇 ⚠️ IMPORTANT INFORMATION ⚠️ 80% of the problems encountered in long-distance camera installations are: 👉 Wrong cable 👉 Low-quality switch 👉 Incorrect PoE capacity 👉 Incorrect RJ45 connector If the camera is not displaying an image from a distance: • First, test at a short distance • Get the image directly from the switch • Determine if the problem is the cable or the distance This method will save you hours of troubleshooting. #securitycamera #camerainstallation #poecamera #nvrsystem #ipcamera #cctv #poeswitch #ethernetcable #rj45 #cat6 #securitysystem #technicalexplanation #security #camera #system #installation #how #to #do #sweat #step #everything #hikvision #4mp #nvr #camera #ip #harddisk #cat6 #test #4monthtest #4 #months #usage 00:00 Introduction – How to install a security camera? 00:06 System scenario: 2 zones – 100 meter distance 00:25 Wired or wireless? Why wired? 01:02 General overview of the system architecture 01:30 Critical points to consider during installation 01:43 List of products used 02:30 Camera technical specifications (4MP, microphone) 02:57 Why is bit rate and switch selection important? 03:08 Types of PoE switches and their purpose 03:50 Switch – NVR connection logic 04:03 Explanation of long-range PoE (300 meters) 04:17 Features of a 16-channel NVR 04:55 Why was CAT6 cable preferred? 05:23 NVR Box Contents 05:45 Hard Disk Installation (4 TB Security Disk) 06:54 NVR Ready for Installation 07:09 NVR Port Options and Cost Advantages 07:31 NVR Connections (Mouse, Ethernet, HDMI) 08:02 System Startup 08:14 General Connection Diagram Repeated 09:13 Switch Connection Layout 09:21 Introduction to Unmanaged Gigabit Switches 09:56 Connection Between Switches 10:15 300 Meters PoE Data + Power Transmission 10:47 General Features of Cameras 11:05 Camera Box Contents 11:16 Camera Connections and Microphone 11:45 Introducing Cameras to the System 12:04 Initial Setup and IP Setting 12:29 IP Address Logic 12:49 Adding Cameras 13:25 Camera Adding Errors and Solutions 13:52 Password Logic in PoE Systems 14:08 Using the Same Brand Products Advantage 14:23 Adding a camera later 15:04 Long-distance testing logic 15:34 Understanding distance and cable problems 16:13 Camera management from the main screen 16:24 Crimping the Ethernet cable (RJ45) 16:45 T568B color sequencing 17:53 RJ45 crimping process 18:57 Checking with a cable tester 19:24 Getting the system up and running 19:34 Camera image quality test 19:51 Camera settings (video + audio) 20:37 Recording settings 21:04 Disk formatting 21:17 Calculating recording time 21:50 Difference between continuous recording and event recording 22:12 Motion detection settings 22:36 Importance of camera-NVR compatibility 22:56 Night vision settings 23:23 Masking and light settings 23:44 Infrared and night mode problems 24:46 Problems experienced in automatic night mode 25:16 Night-day Balance settings 25:35 Recording playback and streaming settings 26:05 Interface and ease of use 26:32 General evaluation 26:45 Closed system setup 26:55 Connecting to the internet later 27:01 Closing and call