XP Deus 2 Legacy 2.0 program | WS6 Tutorial

Here it is!... The WS6 master settings for the Legacy 2.0 program. This video will show you exactly how top input the program onto your WS6 master puck using a step by step tutorial. The legacy program is a custom program for the XP Deus 2 metal detector which aims to reduce iron falsing by boosting all ferrous sounds enabling the user to clearly hear if the target under the coil is ferrous or un ferrous. This will help to prevent you from wasting valuable time investigating suspicious targets which turn out to be ferrous because of program settings masking certain sound and target characteristics. Don't let the machine decide what you should and should not dig, You be the judge! The original video can be found here:    • XP Deus 2 Legacy Program | Hear Everything...   This version uses firmware 2.0 but it can also be used with version 1.10. Here is what you need to program into your Deus 2 remote or WS6 Puck - Program Name LEGACY Base Program - 2 Sensitive Audio Style - PWM Audio Filter - 0 Audio EQ - 150+9db 450+3db 2k+0db 4k+9db Ground Stabilizer - 2 Discrimination - 3.3 5 Tones - 3.3 211hz vol 0 (ground noise) 33 197hz vol 10 (mostly ferrous) 55 630hz vol 10 (small thin coins etc) 73 687hz vol 10 (large coins and artefacts) 73+ 961hz vol 10 (large thick items of non ferrous) B.Caps - 2 Notch - 23-27 Silencer - 0 Sensitivity - 95 Freq Max - 24khz Iron Volume - 0 Reactivity - 3 Audio Response - 5 *Dig targets that are clean and repeatable from multiple directions across ALL tone breaks* #metaldetecting #treasure #treasurehunting #xpmetaldetectors