Assembling the Sled
Follow along to assemble the sled of the Maslow4. Written instructions can be found on our website here:https://www.maslowcnc.com/assembling-... In addition to the parts in the Maslow4 kit, you may want to have some masking tape, a hammer and scissors nearby. None of these are mandatory, but you will see them used in this video. This video is meant to show assembly at a reasonable pace. If you work faster than the video, here are some time stamps so that you can skip ahead. Introduction 0:00 Attaching the stepper motors 3:46 Attaching the dust cover 7:29 Taping on the dust cover 11:29 Bar's trick for adding screws for the dust cover 14:29 Anna's recommendation for the dust cover 16:19 Adding the linear rods 21:27 Attaching the linear rock clamps 22:13
Setting Up Maslow 4.1 In My Garage
Building the Maslow4 Wooden Frame
How to run Calibration Update
CNC Cutting a 4'x4' Sign With Maslow4 for the Oct4th Weekly Kickstarter Update
Calibration Process Walk-through
Building a frame for Maslow 4 CNC
No Celebrity Has ZERO Filter Like Harrison Ford _ and It’s HILARIOUS!
Maslow 4.1 Kits Packing, Playhouse Test Project
Maslow4 Kickstarter Video
I Built a MOBIUS STRIP Violin
The Threadless Ball Screw is Incredible! ...yet flawed.
The Easiest CNC I've Ever Used
Bending wood until it sings
Maslow4 Back in Stock, Project of the Week is Back
Toothless Gears Make Much More Torque Than Conventional Ones, Here's How. Cycloid Drive Explained
Open Source CNC Sauna Build Part 1
This Medical Machine costs $18,000. I Took It Personally.
Festool Is Too Expensive… So I Built My Own Domino Machine
I Built A Table That Shouldn't Work. (but does it?)
